Rubber insulating mat / Black high-voltage resistant insulating rubber mat

▲1. Specifications of Insulating Rubber Mats
(1) By voltage level: 5kv, 10kv, 20kv, 25kv, 35kv
(2) By color: black insulating rubber mat, red rubber mat, green rubber mat
(3) By thickness: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm.
▲2. Application and Storage of Insulating Rubber Mats
Widely used in substations, power plants, distribution rooms, test rooms, and live working outdoors.
Should be stored in a dry and ventilated environment, away from heat sources, and at least 20cm above the ground and walls. Avoid contamination by acids, alkalis, and oils. Do not store outdoors to prevent direct sunlight exposure.
▲3. 15KV Insulating Rubber Mat

1. Overview of 15KV Insulating Rubber Mat:
(1) Introduction: Enhances the insulation between workers and the ground, made from special rubber. Also known as insulating rubber mat, insulating mat, insulating blanket, etc. Features high volume resistivity and wear resistance. Manufactured from non-polar rubbers with excellent insulation properties such as NR, SBR, and IIR. Used as tabletop or floor insulation material in distribution and other work environments.
(2) Appearance: Blemishes or unevenness: depth or height must not exceed the thickness tolerance of the mat; Bubbles: no more than 5 bubbles per square meter with an area less than 1cm², and the distance between any two bubbles should be at least 40mm; Impurities: depth and length should not exceed the mat thickness and must be less than 40mm; Irregular edges or sponginess: width should not exceed 10mm, length should not exceed 1/10 of the total mat length; Cracks: not allowed.

2. National Standards for Insulating Rubber Mats:

Item No. | Test Item | Cycle | Requirements | Remarks 1 | Power Frequency Withstand Voltage Test | 1 year | Voltage Level | Power Frequency Withstand Voltage kV | Duration min | For use in live equipment areas High Voltage | 15 | 1 Low Voltage | 3.5 | 1 During the test, wet cloth or metal foil should be placed above and below the insulating rubber mat, extending 200mm less than the mat's perimeter. Gradually increase the voltage to the value specified in Table 8, maintain for 1 minute, and observe for any breakdown. If no breakdown occurs, the test is passed. When testing in segments, the edges of adjacent segments should overlap. ▲4. Standard Configurations of Insulating Rubber Mats
(1) 5KV Insulating Rubber Mat | Thickness: 3mm | Density: 5.8KG/m² | Colors: red, green, black
(2) 10KV Insulating Rubber Mat | Thickness: 5mm | Density: 9.2KG/m² | Colors: red, green, black
(3) 15KV Insulating Rubber Mat | Thickness: 5mm | Density: 9.2KG/m² | Colors: red, green, black
(4) 20KV Insulating Rubber Mat | Thickness: 6mm | Density: 11KG/m² | Colors: red, green, black
(5) 25KV Insulating Rubber Mat | Thickness: 8mm | Density: 14.8KG/m² | Colors: red, green, black
(6) 30KV-35KV Insulating Rubber Mat | Thickness: 10mm, 12mm | Density: 18.4KG/m², 22KG/m² | Colors: red, green, black

▲5. Features of 15KV Insulating Rubber Mat

Excellent physical and mechanical properties, superior insulation performance, suitable for use in dry environments with high dielectric requirements within a temperature range of -35°C to +100°C. Tested at 43KV, operates normally at 660V. Widely used in substations, power plants, distribution rooms, test rooms, and live working outdoors. Should be stored in a dry and ventilated environment, away from heat sources, and at least 20cm above the ground and walls. Avoid contamination by acids, alkalis, and oils. Do not store outdoors to prevent direct sunlight exposure.